Freedom Pc

Based off of Back7's design
I decided to design and build my own.

The base is made for this display:
https://www.amazon.ca/gp/product/B07ZH6L9L4/ref=ppx_yo_dt_b_asin_title_o06_s01?ie=UTF8&psc=1

I used m3 heatsets to mount everything from mcmaster:
https://www.mcmaster.com/94180A331

I had to use this HDMI connector since there isn't much space around the HDMI port on the display
https://www.digikey.ca/en/products/detail/adafruit-industries-llc/3553/7623055
https://www.digikey.ca/en/products/detail/adafruit-industries-llc/3562/7623064

Usb cable for the touch and power for the display
https://www.aliexpress.com/item/33005520118.html?spm=a2g0o.productlist.0.0.6a209ea4M1u10m&algo_pvid=a3c3ed31-7d53-4347-9f75-e015f9ffe734&algo_expid=a3c3ed31-7d53-4347-9f75-e015f9ffe734-0&btsid=0ab6d69515913903193103982e7a5d&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_
I had one laying around I personally did not order it from aliexpress.

Ethernet switch:
https://www.amaz