Frequency Counter Case

This is a case for a frequency counter widely available on discount Chinesesites such ashttps://www.aliexpress.com/item/1005006203286595.html?spm=a2g0o.order_list.order_list_main.66.61291802TVURcl. Some assembly is required. 4 M3 x 8 mm hex cap screws are required alongwith some glue.Glue the separator inside the base, just below the top hole, with the chamfertoward the top. The separator is shorter than the top hole. Make sure that theseparator is glued with the resulting hole away from the battery hole. Run thebattery wire in the resulting hole, which is away from the battery hole. Theseparator divides the frequency counter from the battery.Use the 4 screws to mount the meter to the bezel, replacing the 4 screws thatcomes with the meter. Glue the assembled base to the assembled bezel with justenough glue.Support material is required. Be gentle when removing it. An infill of 20% isrecommended.This object main web page is: http://www.ctheroux.com/frequency-counter-case/.This object was