Full Sized Couch

This is a BIG print with 75 nearly full print volume pieces. Planning how you buy your materials, and have your print settings will be the difference between this costing about $470 and $1500+. At this scale, a single percentage increase on the infill or an additional base/top layer costs around $10! Although I think the settings can be optimized slightly more, the following settings are currently what I found to work best.Print SettingsBase Pieces (25)Material: PLALayer height: .25Wall loops: 3Top shell: 0Bottom shell: 3Infill: 1%Infill Pattern: HoneycombMiddle Pieces (25)Material: PLALayer height: .25Wall loops: 3Top shell: 4Bottom shell: 2Infill: 2%Infill Pattern: HoneycombTop Pieces (25)Material: TPU (AMS TPU, For others I recommend upping the infill by a couple percent)Layer height: .25Wall loops: 2Top shell: 5Bottom shell: 2Infill: 5%Infill Pattern: gyroidMaterial QuantityPLA: 18.5KGTPU: 5KGI recommend finding a bulk deal for this quantity as you can save at least 25%AssemblyNoth