Fully customizable Box

Before printing: - Select model - Right click > Split > To objects - slightly move the cover away from the base, possibly on a second plate if it is too large - If the height of the base and the lid are identical, you can print the 2 parts at the same time, you just need to plan to gently separate them from each other. PRINT SETTINGS - This box does not require any support. - For good adhesion, degrease the tray well with hot water and dishwashing liquid. - Fairly thin layer height (0.2 max) so that the hinge holes are quite precise - 3 or 4 bottom and top shell layers for a good finish. - 3 walls for strength. - For boxes containing food, provide a compatible filament. Box with hinge and clasp fully configurable under Fusion 360 and fully printable on MakerWorld or in Fusion 360. After printing, insert 1.75 mm filament into the holes as an axis for the hinge. In Fusion 360 you can operate the cover with the mouse to open and close the box (the parameters dialog box must be closed). Un