Thingiverse
Fume Extractor
door creativeje
57
Downloads
18
Likes
0
Makes
For assembling the parts please refer to Video Link: https://youtu.be/2xLQ9wforAc
This is a Fume extractor complete with snap-fit enclosure, cover and parts.
It uses an Arctic P12 fan of thickness 25 mm, carbon filter of thickness 7.2 mm to suck the fumes from the soldering iron.
The enclosure has grills in the front and back and a hole for the fan wiring. The cover fits as a snap onto the enclosure.
Using the T-base and Rod, the enclosure is made height-adjustable by putting in the TeardropBolt, and can be rotated 360 degrees along the horizontal axis! The angle can be set to face your solder fumes using the two pairs of threaded nuts and bolts to secure it in place.
Formats provided: STL and AMF
This is a Fume extractor complete with snap-fit enclosure, cover and parts.
It uses an Arctic P12 fan of thickness 25 mm, carbon filter of thickness 7.2 mm to suck the fumes from the soldering iron.
The enclosure has grills in the front and back and a hole for the fan wiring. The cover fits as a snap onto the enclosure.
Using the T-base and Rod, the enclosure is made height-adjustable by putting in the TeardropBolt, and can be rotated 360 degrees along the horizontal axis! The angle can be set to face your solder fumes using the two pairs of threaded nuts and bolts to secure it in place.
Formats provided: STL and AMF
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!