Fuzzy Skin Test Model

This is a fuzzy skin test displaying multiple combinations of thickness and point distance settings. There are two blocks, with thickness increasing left-to-right along the X axis, and point distance increasing bottom-to-top along the Y axis. The tops of the blocks are labeled. The first block uses thickness values from 0.05 to 0.2 in increments of 0.05. On one side it shows point distances from 0.1 to 0.4 in increments of 0.1, and on the other side it shows point distances from 0.5 to 0.8. The second block is similar, but with increased thickness values from 0.25 to 0.4. Thus, with the two blocks you get every combination of thickness from 0.05 to 0.4 and point distance from 0.1 to 0.8. Use these prints to find the settings that provide the best match to the texture from your build plate, or just to get a feel for fuzzy skin settings.