Garmin mount insert

This is a Garmin mount insert for Garmin mounts. I made this model to accompany my bike computer mount that you can find here:https://makerworld.com/en/models/1697972-canyon-out-front-bike-computer-mount A few of things that you need to be aware before (and after) printing this model.The insert is rotated 90 degrees on the build plate in the supplied print profiles. This produces arguably slightly worse looks to the final part than if it was printed laying flat, but it is required is to achieve good structural strength that can withstand the perpendicular forces exerted on the top overhangs when mounting your bike computer:During prototyping, I experienced horizontal layer splits when I was mounting my Garmin bike computer on the mount insert when I printed this model laying flat on the build plate. The splits happened both on PLA and ASA, so stick to the 90 degrees orientation if you make changes to the print profiles before printing.The mount insert requires two M3x5x4 round threaded