Thingiverse
Gear Machine
door lglauberman
2
Downloads
9
Likes
0
Makes
Gear Machine, fully functional. Good conversation piece.
Running: http://www.ligcomputer.com/downloads/Gear_Machine_Running.mp4
I printed all parts using ABS on a QIDI X-Plus 3. Only the Motor Riser requires supports.
Bearings must be pressed into the gears. Sanding the Gear Plate is a good idea before assembly.
Requires 10-24 x 1/4" Bolts and 6-32 x 3/8" Screws.
Requires the following bearings: https://www.amazon.com/gp/product/B08M9C2HSX/
Requires the following belt style: https://www.amazon.com/gp/product/B09TCZQWXC/
Requires the following motor with M3 screws: https://www.amazon.com/gp/product/B071GTTSV3/
And of course a 12VDC power supply.
This was designed in imperial units so if your slicing software shows any of the parts tiny just scale it up 2540%. Use the STEP files for best results.
Running: http://www.ligcomputer.com/downloads/Gear_Machine_Running.mp4
I printed all parts using ABS on a QIDI X-Plus 3. Only the Motor Riser requires supports.
Bearings must be pressed into the gears. Sanding the Gear Plate is a good idea before assembly.
Requires 10-24 x 1/4" Bolts and 6-32 x 3/8" Screws.
Requires the following bearings: https://www.amazon.com/gp/product/B08M9C2HSX/
Requires the following belt style: https://www.amazon.com/gp/product/B09TCZQWXC/
Requires the following motor with M3 screws: https://www.amazon.com/gp/product/B071GTTSV3/
And of course a 12VDC power supply.
This was designed in imperial units so if your slicing software shows any of the parts tiny just scale it up 2540%. Use the STEP files for best results.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
