Thingiverse
Generic Filament Rack
von squirtle_93
10
Downloads
13
Likes
0
Makes
A generic filament rack made with 3d-printed parts and round wood. Wood poles have a diameter of 30mm (+- 1-2mm).
When done printing, you need a rounded file to correct the holes of the 3d printed parts so they fit better with the wood. There is also little plug inside the object to hold onto the wood better. Depending on the diameter of the wood, this plug needs to be sanded down to not damage the wood too much.
You need to print at least:
2x bottom_front.stl
2x bottom_back.stl
4x connector.stl
Per level you need 4 connectors. I suggest mirroring the connector part, so you can hide the screews better.
When done printing, you need a rounded file to correct the holes of the 3d printed parts so they fit better with the wood. There is also little plug inside the object to hold onto the wood better. Depending on the diameter of the wood, this plug needs to be sanded down to not damage the wood too much.
You need to print at least:
2x bottom_front.stl
2x bottom_back.stl
4x connector.stl
Per level you need 4 connectors. I suggest mirroring the connector part, so you can hide the screews better.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
