Gengar Hueforge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.16mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #00358e PLA BambuLab Basic Blue (or Glow in the Dark Blue) Transmission Distance: 4 #c00d1e PLA BambuLab Basic Red (or Glow in the Dark Red) Transmission Distance: 4 #ffe17f PLA BambuLab Matte Lemon Yellow (or Glow in the Dark Green or Yellow) Transmission Distance: 4 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue (or Glow in the Dark Blue) At layer #17 (1.44mm) swap to Red (or Glow in the Dark Red) At layer #22 (1.84mm) swap to Lemon Yellow (or Glow in the Dark Green or Yellow) At layer #26 (2.16mm) swap to White for the rest. Falls ihr Glow in the Dark verwendet,