GhostRider - HueForge

Ghost Rider - HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 113.15x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mm Filaments Used: (You can use other brands provided you can find close enough colors to match) PLA PolyLite Black Transmission Distance: 0.3 PLA Protopasta Blue Wonder Glitter Transmission Distance: 9 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Wine Red Transmission Distance: 1 PLA BambuLab Basic Orange Transmission Distance: 7 PLA Protopasta Partly Sunny Yellow Transmission Distance: 12This print uses 6 unique filaments Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Blue Wonder Glitter At layer #11 (0.96mm) swap to Blue Gray At layer #15 (1.28mm) swap to Wine Red At layer #17 (1.44mm) swap to Orange At layer #20 (1.68mm) swap to Partly Sunny Yellow for the rest.