Glass Plate Vice

Glass plate vice for your polishing and cleaning needs. The STL can be scaled in your slicer for various sizes. E.g., if you scale it 50%, it would be a perfect little vice for up to 4x5 plates. At 100% it's just big enough to clamp an 8x10 plate on the short edge (8inch/20cm). The STL is just printable on a 256 x 256 x 256 mm printer (e.g., Bambu P1S, X1C at their default setting of 250mm print height limit). Obviously if you have a larger print volume, you can scale up to suit your needs.

Assembly should be self-explanatory, except for the knurled handle, which needs to be screwed on and bonded to the threaded shaft. I used a two-part epoxy glue.