Glidebait V2

Easy to print and build glidebait. 10 minute build time and great action! Build in air chambers.At 100% scale the lure is 145mm long with 36g. Boost MeIf you like my work, i would appreciate a boost ;)What you need:-5 stainless steel screwed eyes M2EU: https://www.lureparts.nl/de/16mm-oesenschraube-edelstahl.htmlUS: https://www.lurepartsonline.com/Stainless-Screw-Eyes?quantity=1&custcol_other_style=9&custcol11=308 (3/4" .062" wire)-1.2mm stainless spring steel wire -superglue-8mm sticker eye (cut in half) -4x 2g lead balls https://tinylink.net/zJ3Lu How to build:-put the lead balls into the holes and fill them with epoxy-add some super glue to the threads and screw in the 5 eyelets (us screws need to be shortened)-don´t screw the eyelets on the joint all the way in. leave about 4mm-use the 1.2mm wire to join the 2 parts and the fin to the tail NOTE: These stencils have many and extreme overhangs, and removing the support is difficult, time-consuming, and requires sanding. If th