Slicer Discord
Glitch Ring – 3D-Druckmodell von MakerWorld MakerWorld
Sport & Outdoors

Glitch Ring

3 Downloads
4 Likes
2 Makes
Zum Modell
Glitch Ring is a floorball training tool for faster development of strength in arms and hands during dribbling.Made for using when training dribbling but can also be used when shooting but be careful with shooting since it put a lot of extra weight on the stick and i would definitely use velcro to fasten the ring if shooting to avid catapulting the ring into someting or someone. Base weight (printed weight) depends on filament and setting but it is about 40g. It is possible to add 5gx2 in each slot and with 7 slots the total weight the can be added is 70g.it is designed for using regular wheel balancing weights so they are easy to find on amazon or car part stores. I recommend using a velcro strap to fasten the ring securely. it is designed for a strap of max 15mm in width.Note that there is a slot in the side to loop in a velcro strap so that it permanently attached. Example weights on amazon.sehttps://www.amazon.se/dp/B08T1TWG5RNote i just cut close around the sides of the weights an
Kategorie
Sport & Outdoors
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Anfänger Niedrige Konfidenz
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
Mindest-Druckbett
50 mm (Klein)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen