Godzilla - hueforge

Hueforge of King kong from Godzilla vs KongThe photos shows the result in 135x200mm and a nozzle of 0.4The model is posed at the window in the last photo.Boost MeThanks for your boost!You can change the X and Y dimensions but do not change the Z dimensionsYou can change the color of the first layer too change the color of the eyesYou must define the printing parameters indicated in the description below and change the filament on the indicated layers. You can use filaments other than those indicated, but the result will differ. You can use any black PLA Hueforge descriptionPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 134.93x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.16mm Filaments Used: #cd007b PLA BambuLab Basic Magenta Transmission Distance: 3 #000000 PLA BambuLab Basic Black Transmission Distance: 0.6 #ffffff PLA BambuLab Basic Jade