Godzilla Hueforge

Project: Godzilla.hfpPrint at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 1.36mm #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3 #000000 PLA BambuLab Matte Charcoal Transmission Distance: 0.6 #41273b PLA Paramount 3D Decepticon Purple Transmission Distance: 1.8 #da4087 PLA Bambu Pink Transmission Distance: 3.2 #781f1c PLA Paramount 3D Iron Red Transmission Distance: 3 #de1619 PLA PolyTerra Lava Red Transmission Distance: 1 #f78e0e PLA PolyTerra Sunrise Orange Transmission Distance: 2.5 #e6dede PLA Overture Matte White Transmission Distance: 3.7This print uses 8 unique filamentsSwap Instructions: Start with Blue Gray At layer #16 (0.76mm) swap to Charcoal At layer #18 (0.84mm) swap to Decepticon Purple At layer #19 (0.88mm) swap to Pink At layer #20 (0.92mm) swap to Iron Red At layer #