Godzilla Hueforge

Project: Godzilla.hfp Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 169.81x240mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA Bambulab Black Transmission Distance: 0.3 PLA Rosa 3D Starter grey Transmission Distance: 0.6 PLA Bambulab White Transmission Distance: 5 PLA BambuLab Basic Red Transmission Distance: 4.1 This print uses 4 unique filaments Swap Instructions: Start with Black At layer #8 (0.72mm) swap to grey At layer #11 (0.96mm) swap to White Border Only Colors from here until the end. At layer #18 (1.52mm) swap to Red At layer #29 (2.4mm) swap to White for the rest.