MakerWorld
Hueforge & Lithophane
Zum Modell
GoT Hueforge
14
Downloads
11
Likes
3
Makes
GoT Hueforge with the Iron ThroneBest TV series!Perfect as a present or decoPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 135.79x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Red At layer #10 (0.88mm) swap to YellowBorder Only Colors from here until the end. At layer #13 (1.12mm) swap to Jade White for the rest.Boost MeYou are awesome!
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
