Grass Snake Modified Trigger Assembly

I was having some trouble assembling the internals in the Grass Snake so I made some tweaks to the way the trigger mechanism goes together. I figured I'd post it here in case it helps anyone else.

First and foremost I turned the trigger + trigger link into one part. You can still assemble the blaster just fine with it printed this way, and I was having issues with the screw connecting the two parts rubbing against the flywheel cage right above it.

I also moved the hole for the screw that links the extension springs back a bit on the trigger link, so you should get more force behind it. Mine wasn't actually pulling hard enough to turn off the switch 100% of the time, I may have gotten too big an extension spring though. (IMPORTANT) because of this, the screw here will need to be screwed in further down since it will need to pass under the pin for the catch. Make sure your screw is short enough that it doesn't go all the way through and drag against the bottom, you may need to shor