Gravity Knife Magnetic with Switch Games

It does work with out magnets. it need 6 mm magnets that are between 1.5-2.5 mm thick. You may need to sand or cut off pieces of the game holder to get your games to fit. Try different orientations depending on your printer. Glue may be need for some parts on some printers, as the thresholds are not perfect for all printers. Use pliers to force the magnets in. Some glue may be needed for the bolts and magnets. The second plate is the no games version. Boost MePretty pls :)Printing:The blade does need to be printed at that angle if you want it to hold games. If your printer is a budget printer try adding 3 support dots along the blades length with manual support. The Blade with no games can be printed flat. Be Careful when putting the sheath on as it can snap try putting on one side at a time. The bolts should be glue in if they keep failing out. The pins on the base might snap during assembly so please be careful they should be fine after assembly. Increase the infil on the sheath it o