Grid Lamp

I’m sharing this beautiful model inspired by a lamp that my beloved mother has at home. Boost MeYou can support me if you wish. You can customize it to your liking by adjusting both the base height and the mesh height. It also includes adapters for E26/E27 and E14 screw lamp holders. If any dimension doesn’t fit what you have at home, don’t worry — you can easily adjust hole sizes, tolerances, and other parameters.No supports required. Printing tips:In my case, I used the default settings on my A1 printer with generic PLA filament. This should work well on any properly maintained machine. Even so, I recommend the following:Always print the base and the adapter you need first. Fit them together and check that they lock properly, applying reasonable pressure. If the fit is correct and feels secure, proceed to print the mesh (plate 3).If, when trying to fit the parts together, the adapter is too loose and does not hold properly, reduce the tolerance parameter slightly (default is 0.10 mm)