Thingiverse
Gridfinity Customizable Container
por jrouvier2
404
Descargas
225
Likes
0
Makes
Customizable #gridfinity basic container for Zach Freedman's [gridfinity system](https://youtu.be/ra_9zU-mnl8)
The OpenScad that drives this is a minor modification of [vector76'es original](https://github.com/vector76/gridfinity_openscad), basically just putting it all in one file and making the configuration a bit easier.
These containers differ from Zach Freedman's containers in that:
* Holes for magnets are optional
* The shelf for a label is optional
* The finger slide at the bottom is optional
* Magnet holes end in a cone, reducing issues with sagging over the magnet holes
* Magnet holes are sized to 6.1mm so a 6mm magnet should press-fit into the hole without needing glue (you can tune this in the customizer)
Attached STL files are examples, you should open in customizer to create your own
The OpenScad that drives this is a minor modification of [vector76'es original](https://github.com/vector76/gridfinity_openscad), basically just putting it all in one file and making the configuration a bit easier.
These containers differ from Zach Freedman's containers in that:
* Holes for magnets are optional
* The shelf for a label is optional
* The finger slide at the bottom is optional
* Magnet holes end in a cone, reducing issues with sagging over the magnet holes
* Magnet holes are sized to 6.1mm so a 6mm magnet should press-fit into the hole without needing glue (you can tune this in the customizer)
Attached STL files are examples, you should open in customizer to create your own
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
