Gridfinity nitril gloves container

This is a 5x3 gridfinity container to hold your nitril gloves which come in a cardboard box.The model was designed for a glove box which measures 200 x 95 mm. However, the print has space for 204,4 x 99,4 mm boxes.To secure the cardboard box, this model uses a lid which is screwed to the base with four M4 screws. Therefore the “base” uses four threaded inserts. It is designed for the CNC Kitchen M4 x 8.1 inserts which require a 5,7 mm hole and 2.1 mm wall thickness. The print profile and CAD model are adjusted to the requirements. To keep the box secured, I embedded four 8x3 mm magnets into the outer feet. The holes are oversized to 8,4 mm to make the installation during the print time easy. As these magnets are placed above three 0,2 mm layers, there is no need to glue them. They will stay in place as they are attracted to the print plate. If you like the original GF magnets, there is a model which holds three 6 mm magnets in each corner feet. With the glove box I have on hand, the to