Griffin

HueForge Project: Griffin. Mythological Creature. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm The Model is a 125x125mm sized square. Filaments Used:PLA Inland BlackPLA Inland Light GrayPLA Inland BeigePLA Inland White This print uses 4 unique filaments. FEEL FREE TO USE YOUR OWN FILAMENT BRANDS. The end result will vary a little with different brands and opacities, but it shouldn't be a significant difference if the colors are close to the same. You can also experiment with different colors all together. If you do change the colors, try sticking with a color of similar brightness…so swap light colors for other light colors, and dark colors for dark. I would recommend just changing out the gray in this one for a lighter color like pastel blues, yellows, greens, etc.. Swap Instructions: (if you do not have an AMS unit, just add a pause at the following layer numbers and swap to the next color) Start with BlackAt layer #11 swap to Light GrayAt layer #