Grumpy Bullfinch Bookmark

Have you ever wondered what a Grumpy Smoking Bullfinch would look like?Exactly like this model. this model comes with holes on the angles as well as a strap hole in the top side.Feel free to remove or adjust as you see fit. You can resize the model on the X&Y, but not on the Z to not mess up layers and color swaps.Remember to deselect unform scale in the slicer before you resize! Boost MeBoost me if you like unexpectedly cute little birds! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 39.47x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.9mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA PolyTerra Fossil Grey Transmission Distance: 1.6 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to Fossil Grey At layer #14 (1.2mm) swap to White for the rest.