Guitar Footstool Basic

A basic footstool to lift my leg up when practising the guitar.

Dimensions: 135 x 250 x 90 mm (complete).

I split this because of the limited size of the printing bed. You need to print off two of the same *.stl file, each being 135 x 145 x 90 mm in size. For scale I've put my slipper on top in the image, I'm a UK 8.

I made it a tight fit so no gluing needed, but they do need a good bash together.

My printers maximum print speed is 35 mm/s and it takes about 8 h per side to print off. with 0.3 mm layer height. You probably need about 250 g of PLA including supports and brim to print both sides with the print settings below.