Gundam HueForge

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 100x100mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.6mmFilaments Used: PLA+ GST3D Black Transmission Distance: 5 PLA+ GST3D RED Transmission Distance: 3.3 PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to RED At layer #13 (1.12mm) swap to White for the rest