gutter cleaner

Please read before printing: This is not a simple 'print and use' project. This needs extra work after printed. You will need 80 grit sand paper to sand the male end for a good fit into the nozzle. I also had to cover everything inside and out with extra thin super glue to plug the pours to keep it from leaking. I also had to make a seal to go inside the nozzle, so it wouldn't leak between the main part and nozzle. Again, just a heads up on the work involved.

I needed an easy way to clean my gutters from the ground. So I made this. This mounts onto a telescopic tree branch trimmer, and the shape allows you to scoop stuff out of the gutters. While the water jet washes smaller stuff out and down the down spout. I used 5 wall thickness and 5 layers for bottoms and tops, with a 40% infill. That may have been overkill, but I didn't want it to break, or leak. Well, it leaks. Like a sieve. It still works though. But my plan is to coat the whole thing with epoxy to plug the pours. Also, it