Guyver Hueforge

Hueforge for the Guyver. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.2mmThe Model is 159.18x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Transmission Distance: 5.7 PLA BambuLab Basic Gray Transmission Distance: 14 PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #13 (0.68mm) swap to Blue At layer #19 (0.92mm) swap to Gray At layer #30 (1.36mm) swap to White for the rest.