Halbach Open BLDC Motor First Release

Untested first parametric release of an outrunner BLDC motor
Parametric design can be adjusted for pole pairs (quadruplets because of Halbach setup), magnet sizes and such; however many aspect will have to be manually calibrated... The individual elements have to be accessed for stl exporting by commenting/uncommenting(//) the particular lines. So far there are only 3 printed parts Base, Stator and Rotor. First test print shows that the mating feature between stator and base is too tight to fit and will need some coding...

12xM3x__ Nuts and bolts for base and ?Prop? mount

1x 6807 Bearing (if you buy this from my Ebay Store send me a message and get the 608ZZ Bearing included for free! https://www.ebay.de/itm/184239183693 )

1x 608 Bearing

M8x100 screw or threaded rod plus nuts

24x Magnet 50x5x2.5 mm

winding wire

For general hints on wiring/winding a motor like this refer to the pioneers work: https://www.instructables.com/600-Watt-3d-printed-Halbach-Array-Brushles