Thingiverse

Hammr

by CDeviant

5 Downloads

1 Likes

0 Makes

I made this for tapping the part scraper to remove prints from the print bed.

Nice and light for tapping, at only 80 grams, just under 3 ounces.

Twisted handle looks cool.

Small tapping end, and wide tapping end.

Prints in about 3.5hr at .3 layer height

hammer mallet print in place

Source

Thingiverse

What you need to print this: Beginner Low confidence

Why?

print-in-place design

Print-in-place

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

3.5 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Hammr need supports when printing?

Nope — Hammr is print-in-place, so it comes off the bed ready to use. No supports, no assembly.

How long does it take to print Hammr?

According to the design notes, Hammr takes approximately 3.5 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Hammr available in?

Hammr is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Hammr free to download?

Yes, Hammr is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Hammr

Add to Collection