Thingiverse
HDD Rack
por lkashl
13
Descargas
12
Likes
0
Makes
Print multiple HDD's down a spindle allowing for easy servicing of 3.5 inch mechanical drives.
Make sure to use ABS for sufficient heat tolerance (PLA will melt)!
I used rubber dampeners on the inside (neoprene) to minimise vibration.
Ensure you have enough perimeter thickness for the walls to be 100% solid, you should also have solid infill to provide enough rigidity to the frame
Screw holes are provisioned to be tight. Took about 4 hours per piece on a 1mm nozzle
Make sure to use ABS for sufficient heat tolerance (PLA will melt)!
I used rubber dampeners on the inside (neoprene) to minimise vibration.
Ensure you have enough perimeter thickness for the walls to be 100% solid, you should also have solid infill to provide enough rigidity to the frame
Screw holes are provisioned to be tight. Took about 4 hours per piece on a 1mm nozzle
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!