HellBoy

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 130x231.07mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA AzureFilm Black PLA AzureFilm Basic Red PLA AzureFilm White This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #13 (1.12mm) swap to White for the rest.