Hellraiser Hue Forge

All of the pictures displayed are of the actual models. Please take a moment to rate and endorse the models, as it is very helpful. Hellraiser HueForge Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 128.4x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 4 PLA BambuLab Basic BambuLab Green Transmission Distance: 2 PLA BambuLab Matte Marine Blue Transmission Distance: 0.5 PLA BambuLab Basic Blue Transmission Distance: 4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #10 (0.88mm) swap to BambuLab Green At layer #11 (0.96mm) swap to Marine Blue At layer #14 (1.2mm) swap to Blue At layer #16 (1.36mm) swap to Jade WhiteBorder Only Colors