hellsing alucard

Project: hellsing alucard Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.4mmThe Max Depth is 2.1mm and the Actual Depth is 2.1mmFilaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA BambuLab Basic Red Transmission Distance: 4 PETG JAYO Gray Transmission Distance: 2.5 PETG JAYO White Transmission Distance: 6This print uses 4 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!Swap Instructions: Start with Black At layer #7 (0.64mm) swap to Red At layer #11 (0.96mm) swap to Gray At layer #16 (1.36mm) swap to White for the rest. Boost Meboosts help me post these files and there is much more to come!