HELP

Project: HELP.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.32mmThe Max Depth is 2.2mm and the Actual Depth is 1.8mmFilaments Used: PLA ESUN NEGRO Transmission Distance: 0.2 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with NEGRO At layer #5 (0.56mm) swap to Blue Gray At layer #8 (0.8mm) swap to Jade White for the rest.