Hippety Hopper

Hippety Hopper, a cartoon character in the Looney Tunes and Merrie Melodies series of short films produced by Warner Bros. He is a baby kangaroo but is mistaken for a giant mouse by Sylvester the Cat, Frequently, Hopper changes places with an actual mouse, generally when it is most embarrassing for Sylvester. No supports are required. One piece contains built-in supports and braces. An optional part without the built-in supports/braces is also supplied if you want to use your slicer supports (see notes below). If you have the proper filament colors, no painting is needed. The assembled model is 195mm tall and is mostly in proportion to my previously released Looney Tunes models. Enjoy! ........................................................................................................... Special shoutout to maker Benoît Lussier for providing QA printing and quality feedback. ........................................................................................................... **Print Instructions:** Supports: No Resolution: .2mm Infill: 10% Notes:** Refer to the notes below for a few helpful printing and assembly instructions. ........................................................................................................... **Building the model** Colors (your colors may vary, as this character has changed quite a bit over the years) Black: (Paramount3D PLA - Black) eye_black_right eye_black_left eyebrow_right eyebrow_left nose .. Dark Red: (Paramount3D PLA - Iron Red) tongue .. Red: (Hatchbox PLA - True Red) glove_right glove_left .. White: (Overture PLA - White) eye_white_left eye_white_right .. Medium Brown: (Polymaker PLA - Army Brown) body_bottom body_top body_top_withoutsupports .. Dark Brown: (Hatchbox PLA - Brown) mouth .. Light Brown: (Polymaker PLA - Army Beige) ear_right ear_left .. ........................................................................................................... **Printing and assembly tips** Printing tips 1 - N