Hueforge Cigarretes Kill

Project: Cigarretes Kill.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 117.28x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used:PLA PolyLite Black Transmission Distance: 0.3PLA BambuLab Basic Red Transmission Distance: 4PLA BambuLab Basic Yellow Transmission Distance: 6PLA PolyLite White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions:Start with BlackAt layer #8 (0.72mm) swap to RedAt layer #13 (1.12mm) swap to YellowAt layer #20 (1.68mm) swap to White for the rest.