HueForge Clone Trooper

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 210x346.08mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 4mm and the Actual Depth is 1.7mmFilaments Used: PLA Creality Black Transmission Distance: 1 PLA Creality White Transmission Distance: 7 PLA+ Esun Dark Blue Transmission Distance: 2This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #6 (0.64mm) swap to White At layer #16 (1.44mm) swap to Dark Blue for the rest.