Hueforge Disturbed

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x200mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 2.5mm and the Actual Depth is 2.6mm This print uses 4 unique filaments Swap Instructions: Start with Black At layer #10 (0.88mm) swap to Wine Red At layer #19 (1.6mm) swap to Yellow At layer #23 (1.92mm) swap to Jade White for the rest.