Hueforge DJ monkey

Project: DJ monkeyPrint at 100% infill with a layer height of 0.16mm with a base layer of 0.2mmThe Model is 159.41x159.41mm in sizeYou may print at higher layer heights below the Base Thickness of 0.2mmThe Max allowed Thickness is 3.24mm and the Actual Thickness is 2.92mmYou can adjust the X and Y to make print larger , DO NOT ADJUST THE Z.Filaments Used: #00818a PLA SUNLU GRASS GREEN Transmission Distance: 1.8 #080a0d PLA Sunlu Black Transmission Distance: 0.1 #ee465c PLA Sunlu Matte Red Transmission Distance: 2.6 #ffffff PLA ELEGOO White Transmission Distance: 5 #fec600 PLA BambuLab Basic Sunflower Yellow Transmission Distance: 4.3 #f1c964 PLA SUNLU GOLD Transmission Distance: 5.8 #ff9016 PLA BambuLab Basic Pumpkin Orange Transmission Distance: 4.7This print uses 7 unique filamentsSwap Instructions: Start with GRASS GREEN At layer #3 (0.52mm) swap to Black At layer #5 (0.84mm) swap to Red At layer #6 (1mm) swap to White At layer #8 (1.32mm) swap to Red At layer #12 (1.96mm) swap to S