Hueforge Donkey

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 141.39x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Black Transmission Distance: 0.3 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA BambuLab Grey Transmission Distance: 1 PLA BambuLab Jade White Transmission Distance: 5This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.72mm) swap to Blue Gray At layer #13 (1.12mm) swap to Grey At layer #20 (1.68mm) swap to Jade White for the rest.