HueForge Forest Sunset

Did a hueforge print of a photo which I like of a forest sunset. I added the original photo for convenience. I added a pause command at layer 15 in the print profile so you can swap e.g. black or brown AMS slot for white. You may scale the x and y axis to make the print bigger but not z axis! Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x135mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used:PLA+ Sunlu Black Transmission Distance: 0.3PLA BambuLab Matte Dark Brown Transmission Distance: 2PLA BambuLab Matte Mandarin Orange Transmission Distance: 3PLA+ Sunlu Silk Light Gold Transmission Distance: 5PLA+ Sunlu White Transmission Distance: 5This print uses 5 unique filamentsSwap Instructions:Start with BlackAt layer #7 (0.64mm) swap to Dark BrownAt layer #11 (0.96mm) swap to Mandarin OrangeAt layer #14 (1.2mm) swap to Light GoldAt layer #16 (1.36mm) swa