HueForge Hoggle "Labyrinth"

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.4mmFilaments Used: PLA Smart Recycled Black Transmission Distance: 0.5 PLA Smart Recycled White Transmission Distance: 5.7This print uses 2 unique filamentsSwap Instructions: Start with Black At layer #9 (0.8mm) swap to White for the rest. Boost MeThanks!!