Hueforge - Inosuke

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 112.54x200mm in size Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA BambuLab Tough Gray Transmission Distance: 1.8 PLA BambuLab Matte Ash Gray Transmission Distance: 1.5 PLA PolyLite White Transmission Distance: 5 Swap Instructions: Start with Black At layer #9 (0.8mm) swap to Gray At layer #14 (1.2mm) swap to Ash Gray At layer #20 (1.68mm) swap to White for the rest.