hueforge IT

Project: it hueforge.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 250.31x141.48mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.2mmFilaments Used: PLA SMARTFIL NEGRO Transmission Distance: 0.6 PLA SMARTFIL ROJO Transmission Distance: 4.5 PLA SMARTFIL AMARILLO SM Transmission Distance: 9.8 PLA SMARTFIL BLANCO FRIO Transmission Distance: 6.6This print uses 4 unique filamentsSwap Instructions: Start with NEGRO At layer #9 (0.8mm) swap to ROJO At layer #12 (1.04mm) swap to AMARILLO SM At layer #15 (1.28mm) swap to BLANCO FRIO for the rest.