Hueforge Kirillin

Project: kirillin.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 2.5mmFilaments Used: IMAGE #39b2d4 Transmission Distance: 1 PLA sunlu matte blue Transmission Distance: 1.5 PLA Jessie Premium Purple Eater Transmission Distance: 1 PLA sunlu matte orange Transmission Distance: 3.9 PLA polyterra matte red Transmission Distance: 2.3 PLA sunlu matte white Transmission Distance: 4.7 PLA overture matte yellow Transmission Distance: 3.9This print uses 7 unique filaments!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!!!!! It appears you have Image Colors as Filaments. It will not be possible to print this. !!!!!Swap Instructions: Start with #39b2d4 At layer #8 (0.72mm) swap to matte blue At layer #10 (0.88mm) swap to Purple Eater At layer #12 (1.04mm) swap to matte orange At layer #17