hueforge naruto

Project: naruto.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 170x170mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA 3dhojor matte black Transmission Distance: 0.6 PLA sunlu matte blue Transmission Distance: 1.5 PLA esun matter marine blue Transmission Distance: 1.1 PLA sunlu matte white Transmission Distance: 4.7 PLA polyterra matte red Transmission Distance: 2.3 PLA sunlu matte orange Transmission Distance: 3.9 PLA overture matte yellow Transmission Distance: 3.9This print uses 7 unique filamentsSwap Instructions: Start with matte black At layer #6 (0.56mm) swap to matte blue At layer #8 (0.72mm) swap to matter marine blue At layer #10 (0.88mm) swap to matte white At layer #13 (1.12mm) swap to matte red At layer #16 (1.36mm) swap to matte orange At layer #17 (1.44mm) swap to matte yellow At layer #20 (1.68mm) swap to matte white for the