hueforge

Project: freddy.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 1.7mmFilaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Default White Transmission Distance: 5 PLA BambuLab Basic Gray Transmission Distance: 2This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #7 (0.64mm) swap to White At layer #9 (0.8mm) swap to Gray At layer #15 (1.28mm) swap to White for the rest.