HueForge "Octane"

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA PolyTerra Charcoal Black Transmission Distance: 0.3
PLA BambuLab Basic BambuLab Green Transmission Distance: 8
PLA PolyTerra Muted Red Transmission Distance: 1
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA PolyLite Pro White Transmission Distance: 5

Swap Instructions:
Start with Charcoal Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #9 (0.8mm) swap to Muted Red
At layer #11 (0.96mm) swap to Yellow
At layer #15 (1.28mm) swap to White for the rest.